Antena ASC Signal 1.8 m RxTx Class I Type 180TX

The ASC Signal Type 180TX 1.8 m Class I RxTx Antenna is a rugged commercial grade product suitable for the most demanding applications. The reflector is thermoset-molded for strength and surface accuracy. Molded into the rear of the reflector is a network
of support ribs which not only strengthens the antenna, but also helps to sustain the
critical parabolic shape necessary for transmit performance.

The Az/El mount is constructed from heavy-gauge steel to provide a rigid support to the reflector. The Az/El mount secures the antenna to any 114 mm (4.50”) O.D. mast and prevents slippage in high winds. Hot-dip galvanizing is standard for extreme environmental conditions.

  • All materials comply with EU directive No. 2002/95/EC (RoHS).
  • One-piece thermoset-molded offset reflector.
  • Single bolt fine elevation adjustment.
  • Galvanized 19 mm (.75”) O.D. feed support legs
  • Plated hardware for maximum corrosion resistance.
  • Available with C-Band or Ku-Band feeds.
  • Hot dip galvanized Az/El mount.
  • Designed for typical 1 W and 2 W Block Up-Converters (BUCs)*

* 2 kg or 4.5 lb max. weight for RF electronics (BUC and LNB) Ku-Band

5 kg or 11 lb max. weight for RF electronics (BUC and LNB) at C-Band

Download Hoja de Datos en PDF

Antena ASC Signal 1.8 m C-band Circular Polarized Type 183

The ASC Signal 183 1.8 m Class III RxTx Antenna is a rugged commercial grade product suitable for the most demanding applications. The reflector is thermoset-molded for strength and surface accuracy. Molded into the rear of the reflector is a network of support ribs which not only strengthens the antenna, but also helps to sustain the critical parabolic
shape necessary for transmit performance.

The Az/El mount is constructed from heavy-gauge steel to provide a rigid support to the reflector and feed support arm. Heavy-duty lockdown bolts secure the mount to any 114 mm (4.50”) O.D. mast and prevent slippage in high winds. Hot-dip galvanizing is standard on this model for maximum environmental protection.

  • All materials comply with EU directive No. 2002/95/EC (RoHS).
  • One-piece precision offset thermosetmolded reflector.
  • Heavy-duty galvanized Az/El mount.
  • Fine Azimuth and elevation adjustments.
  • Galvanized support arm and alignment struts.
  • Factory pre-assembled mount.
  • Galvanized and stainless hardware for maximum corrosion resistance.
  • RF tested feed assembly.
  • Heavy-duty Class III mount for 11 kg (25 lb) RF electronics (LNB & BUC).

Download Hoja de Datos en PDF

Antena ASC Signal 1.8 m C-band Linear RxTx Class III Type 183

The ASC Signal Type 183 1.8 m Class III RxTx Antenna is a rugged commercial grade product suitable for the most demanding applications. The reflector is thermoset-molded for strength and surface accuracy. Molded into the rear of each reflector is a network of
support ribs which not only strengthens the antenna, but also helps to sustain the critical
parabolic shape necessary for transmit performance.

The Az/El mount is constructed from heavy-gauge steel to provide a rigid support to the reflector and feed support arm. Heavy-duty lockdown bolts secure the mount to any 114 mm (4.50”) O.D. mast and prevent slippage in high winds.

Hot-dip galvanizing is standard on this model for maximum environmental protection.

  • All materials comply with EU directive No. 2002/95/EC (RoHS).
  • One-piece precision offset thermosetmolded reflector.
  • Heavy-duty galvanized Az/El mount.
  • Fine Azimuth and elevation adjustments.
  • Galvanized support arm and alignment struts.
  • Factory pre-assembled mount.
  • Galvanized and stainless hardware for maximum corrosion resistance.
  • RF tested feed assembly.
  • Heavy-duty Class III mount for 11 kg (25 lb) RF electronics (LNB & BUC).

Download Hoja de Datos en PDF