Antena Andrew 1.8 m RxTx Class I Type 180TX

The Andrew Corporation Type 180TX 1.8 m Class I RxTx Antenna is a rugged commercial grade product suitable for the most demanding applications. The reflector is thermoset-molded for strength and surface accuracy. Molded into the rear of the reflector is a network of support ribs which not only strengthens the antenna, but also helps to sustain the critical parabolic shape necessary for transmit performance.

The Az/El mount is constructed from heavy-gauge steel to provide a rigid support to the reflector. The Az/El mount secures the antenna to any 4.50”
(114 mm) O.D. mast and prevents slippage in high winds. A specially
formulated powder paint process offers excellent protection from weather-related corrosion. Hot-dip galvanizing is optional for extreme environmental conditions.

  • One-piece precision offset thermosetmolded reflector.
  • Single bolt fine elevation adjustment.
  • Galvanized .75” (19 mm) O.D. feed support legs
  • Factory pre-assembled mount.
  • Plated hardware for maximum corrosion resistance.
  • Available with C-Band or Ku-Band feeds.
  • Optional hot dip galvanized Az/El.
  • Designed for typical 1W and 2W Block Up-Converters (BUCs)*

*4.5 lb or 2 kg max weight for RF electronics (BUC and LNB) at Ku-band
11 lb or 5 kg max wight for RF electronics (BUC and LNB) at C-Band.

Download Hoja de Datos en PDF

Antena Andrew 1.2 m RxTx Class III Type 124

The Andrew Corporation Type 124 1.2 m Class III RxTx Antenna is a rugged commercial grade product suitable for the most demanding applications. The reflector is thermoset-molded for strength
and surface accuracy. Molded into the rear of the reflector is a network of support ribs which not only strengthens the antenna, but also helps to sustain the critical parabolic shape necessary for transmit performance. The reflector optics feature a long focal length for excellent cross-pol performance, required by many satellite operators.

The heavy-duty Az/El mount and antenna support structure are constructed from heavygauge steel to provide a rigid support to the
reflector. The mount secures the antenna to any 2.88” – 3.00“ (73-76 mm) O.D. mast and prevents slippage in high winds. Hot-dip galvanizing is standard on this model for maximum environmental protection.

  • One-piece precision offset thermosetmolded reflector.
  • Heavy-duty Az/El mount and back structure.
  • Fine azimuth and elevation adjustments.
  • Galvanized support arm and alignment struts.
  • Galvanized and stainless hardware for maximum corrosion resistance.
  • Available with a variety of ODU mounting kits.
  • Heavy-duty Class III mount for 25 lb (11kg) RF electronics (LNB & BUC).

Download Hoja de Datos en PDF

Antena Andrew 1.2 m RxTx Class II Type 123

The Andrew Corporation Type 123 1.2 m Class II RxTx Antenna is a
rugged commercial grade product suitable for the most demanding
applications. The reflector is thermosetmolded for strength and surface
accuracy. Molded into the rear of the reflector is a network of support
ribs which not only strengthens the antenna, but also helps to sustain the
critical parabolic shape necessary for transmit performance. The reflector
optics feature a long focal length for excellent cross-pol performance,
required by many satellite operators.

The Az/El mount is constructed from heavy-gauge steel to provide a rigid
support to the reflector. The Az/El mount secures the antenna to any 2.88”-3.00” (73-76 mm) O.D. mast and prevents slippage in high winds. A specially formulated powder paint process offers excellent protection from weatherrelated corrosion.

  • One-piece precision offset thermosetmolded reflector.
  • Long focal length optics for low cross-pol performance.
  • Fine azimuth and elevation adjustments.
  • Galvanized .75” (19 mm) O.D. side feed support legs and 2” (51 mm) O.D. lower feed support.
  • Plated hardware for maximum corrosion resistance.
  • Available with Ku-Band Co–Pol. or Cross–Pol. Feeds.
  • Class II system designed for typical 2W and 4W Ku-Band Block Up-Converters (BUCs)*

*12 lb or 5.4 kg max. weight for RF electronics (BUC and LNB)

Download Hoja de Datos en PDF